JCS Hobbies, The Original Crash Resistant Blade for the Blade CP and now the Axe CP too!

Setup Guide

Tips and Tricks for Setup...

Pitch Control Rod Length

Some people have inquired as to why their CP won't lift off the ground once they put on the Plasti-Blades. Here is the simple fix for that issue. All you need to do is increase the pitch control rod length as shown below. You should see about 4 threads separating the two inside edges of the ball links where the threaded rod is exposed. The overall length is shown below.

Avg. rod length from end to end: 25mm

This is the setup for the pitch control rods that most Blade CP's require when flying on the stock battery. This was where I had mine set on both my Blade CP's and they flew great with the stock battery and stock 10T motor.

Tail boom Upgrade

I went to the local hobby shop and bought a 3/16" aluminum tube to replace the CF tail boom on my stock CP. This works the same as the tail boom you get with the CNC frame from www.flighttechusa.com It is a mod that will reduce breakage on random boom strikes people are having on crashes and hard landings.